Skip to content 
Using a submersible slurry pump on a 30-ton excavator for river sand pond sediment dredging can be an effective method to remove accumulated sediment and maintain the desired depth in the pond.Tussu finished one hydraulic submersible slurry pump shippment, this hydraulic submersible dredge sand pump will be mounted on 30 tons excavators for using river sand pond sediment dredging.
Here’s an overview of how this process typically works:
Equipment Selection: Choose a submersible slurry pump that is suitable for the dredging operation. Consider factors such as pump capacity, head requirements, and the type of sediment you will be dealing with. Ensure that the pump is compatible with the excavator’s hydraulic system.
Preparation: Before starting the dredging operation, prepare the excavator by attaching the submersible slurry pump to the arm or boom. Ensure that the pump is securely connected and properly aligned for effective pumping.
Positioning: Position the excavator at the desired location within the river sand pond. Take into account the sediment distribution and the depth required for dredging.
Submersion: Lower the excavator’s arm and the attached submersible slurry pump into the water until the pump is fully submerged. Ensure that the pump is positioned close to the sediment to maximize efficiency.
Activation: Start the excavator’s engine and engage the hydraulic system. Activate the submersible slurry pump, which will suck in water and sediment through its intake and discharge it through a hose or pipeline.
Dredging Operation: Maneuver the excavator and submersible slurry pump to the areas in the pond where sediment accumulation is high. Use the excavator’s arm to direct the pump’s intake towards the sediment to be dredged. The pump will agitate and mix the sediment with water, creating a slurry that can be pumped out.
Pumping: The submersible slurry pump will pump the sediment-water slurry out of the pond through the discharge hose or pipeline. Ensure that the discharge location is suitable, following any applicable environmental regulations.
Monitoring: Continuously monitor the dredging operation to ensure efficient sediment removal and prevent any obstacles or clogs in the pump or pipeline. Adjust the pump’s position and the excavator’s movements as necessary.
Completion: Once the desired dredging has been accomplished, raise the submersible slurry pump out of the water, and detach it from the excavator. Clean and maintain the equipment as per the manufacturer’s recommendations.
