Skip to content 
-
Most popular related searches
- drainage pump
- drainage pumping
- submersible electric drainage pump
- electric pump
- oil barrier
- submersible drainage pump
- submersible electric pump
- electric submersible pump
- submersible drainage
- submersible pump
Features
- Pump body in cast iron with threaded delivery spout DN 65;
- Cast iron impeller;
- Double mechanical seal in silicon carbide with oil barrier on the pump side, graphite ceramic on the motor side;
- Motor shaft in AISI 304 steel for the hydraulic part;
- Ball bearings;
- Liquid temperature 0 – 40 ° C;
- Equipped with 10 meters of HO7 RNF cable;
- For single-phase models it is necessary to use a complete control panel of the starting capacitor (35 μF for the 1.5 HP version, 40 μF for the 2 HP version).
Engine
- 2-pole electric induction motor in oil bath suitable for continuous service;
- Laminators for stator with low specific loss
- Class F insulation;
- IP 68 protection;
- The motor protection is the responsibility of the user.
On Demand:
- Other operating voltages and frequencies; special liquids.
