Skip to content 
The flow rate and head pressure requirements for stainless steel submersible sewage pumps can vary depending on the specific application and site conditions. However, here are some common flow rates and head pressures you may encounter:
Flow Rates:
- Low flow rates: Typically range from a few gallons per minute (GPM) to around 100 GPM.
- Medium flow rates: Can range from 100 GPM to several hundred GPM.
- High flow rates: Can go beyond several hundred GPM and may reach several thousand GPM for large-scale sewage systems.
Head Pressures:
- Low head pressures: Usually range from a few feet to around 30 feet of head.
- Medium head pressures: Can range from 30 feet to around 100 feet of head.
- High head pressures: Can exceed 100 feet of head and may go up to several hundred feet for challenging pumping conditions or long-distance transfers.
It’s important to note that these ranges are general and can vary based on the specific pump model, impeller design, and system requirements. It’s recommended to consult with the pump manufacturer or a technical expert to determine the appropriate flow rate and head pressure specifications for your particular application.
