Skip to content 
Submersible slurry pump
ZJQ submersible centrifugal slurry pumps are mainly used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores,
refuse ores, ashes, cinders, cements, mud, mineral stones and etc.
Application Condition
1— Power: 50/60HZ, 380V/460V/660V, 3-Phase.
2— Medium Temperature: Max. 40°C and without explosion gas.
3— Slurry Concentration By weight up to 60%.
4— Max submersible depth: <20m
Min submersible depth: >1m
5— Type of installation: Vertical (recommend) or as
customer’s requirement
6— Continuous operation
2— Medium Temperature: Max. 40°C and without explosion gas.
3— Slurry Concentration By weight up to 60%.
4— Max submersible depth: <20m
Min submersible depth: >1m
5— Type of installation: Vertical (recommend) or as
customer’s requirement
6— Continuous operation
Application and Feature
ZJQ submersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump. It is used for delivering liquid contained sand, coal cinder solid etc.. The pump can be mainly employed in clearing the mud in lake, river, sea and widening channel etc. it also can be applied to clear out sewage pool; in building site, steel works and power station etc. the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit. The pump set consists of main impeller and vice impeller two parts. The main impeller is used for absorbing and delivering solid-liquid mixture, the vice impeller is used for spraying or stirring solid-liquid mixture to help the impeller delivering.
Advantage
1— Submersible work Without influence of suction head.
2— No assistant vacuum pump, save your invest
3— No noise, keep the silence of your work station
4— With agitator, no need extra stirring devices , more convenience
for operating.
5— It need not to build pump house.
6— Directly works on the surface of the slurry, with more efficiency
to deliver slurry.
2— No assistant vacuum pump, save your invest
3— No noise, keep the silence of your work station
4— With agitator, no need extra stirring devices , more convenience
for operating.
5— It need not to build pump house.
6— Directly works on the surface of the slurry, with more efficiency
to deliver slurry.
Main part number at the drawing
| 1. Power cable 2. Cable cover 3. Cable seat 4. Motor cover 5. Thermal sensor 6. Stator 7. Rotor 8. Lower bearing 9. Float switch 10. Oil chamber 11. Mechanical seal | 12. Oil sealing 13. Spacer sleeve 14. Casing cover 15. Casing 16. Impeller 17. Wear ring 18. Strainer 19. Agitator 20. Impeller cap 21. Base plate 22. Control cable |
Materials of construction
| IMPELLERS | CASING | AGITATOR | SHAFT | WEAR RING | EXPELLER | CASING COVER | SPACER SLEEVE | OIL CHANBER | OHTER PARTS | |
| Standard | KMTB Cr26 | Cast Iron | KMTB Cr26 | St. St. 316 | KMTB Cr26 | KMTB Cr26 | KMTB Cr26 | St. St. 316 | Cast Iron | Cast Iron |
Specification
• Size range (discharge) 1” to 20” 25 mm to 500 mm
• Capacities to 22,000 gpm to 5,000 m3/hr
• Heads to 426 ft to 130 m
• Pressures to 300 psi to 2,020 kPa
Type Notation
ZJQ50-26-11
50 Capacity(m3/h)
26 Head(m)
11 Power(kw)
J With Agitator
L With cooling jacket
Pump performance parameters
| Type | Capacity(m3/h) | Head(m) | Motor power(kw) | Speed(rpm) | Max. solids dia.(mm) |
| ZJQ30-30-7.5 | 30 | 30 | 7.5 | 2850 | 7 |
| ZJQ70-20-11 | 70 | 20 | 11 | 980 | 24 |
| ZJQ150-15-15 | 150 | 15 | 15 | 980 | 32 |
| ZJQ200-15-22 | 200 | 15 | 22 | 950 | 44 |
| ZJQ720-36-160 | 720 | 36 | 160 | 730 | 56 |
| ZJQ300-20-37 | 300 | 20 | 37 | 980 | 69 |
| ZJQ1000-32-200 | 1000 | 32 | 200 | 730 | 72 |
| ZJQ1450-31-250 | 450 | 31 | 250 | 730 | 92 |
